Click the appropriate link below for a
detailed installation directions and diagrams. These diagrams
should answer all questions pertaining to the installation
of the 2009 Dodge Ram 1500 5.7 Hemi exhaust systems. If you should have any problems
with the installation of this product, please contact
our service department at (609) 890-0481 for further instructions.
To view larger diagrams, click on the enter here buttons below the pictures.
DOD TP 5 Installation Instructions
Tools Needed for Install; 13mm Socket w/Ratchet.
A vice or channel lock pliers
WD-40 type spray.
The work can be done without lift or ramps
[ But, they are helpful. ]
Spray WD-40 on factory tip clamp bolts and loosen the 13 mm bolts until tips become lose enough to wiggle off the tailpipes. Then remove from truck..
Click here to see installation pictures.
Put the clamp on Mufflex tip and re-install on factory tailpipe.
Leave bolts snug until adjustments have been made and then tighten the tip bolts until the tips are secure.
Mufflex Performance Exhaust is not responsible for typographical errors.
|
